RPS is an authorized distributor of Lancs Industries' shielding and other products.

Properly designed work tents will reduce cross-contamination from work being done on structures or spaces contaminated by radiological or other hazardous materials. Serving as a barrier between work surfaces and clean areas, tents are used to create a controlled environment to reduce overall exposure levels during work, and to minimize the scope and complexity of subsequent cleanup operations.

The photo on the right illustrates a custom designed work tent maintained by RPS HEPA units and charcoal adsorbers.

Click here to use the
Perma-Con Ventilation Calculator.

The resulting calculation will specify the size of the vent unit required to produce the desired number of air changes.

Shown below are several examples of work tents. RPS and Lancs Industries work in tandem to design, customize and manufacture the tent in the size and configuration specifically required for your project needs.

Click here to request more information about work tents.

LI-360A Dual Chamber Tent

• 8′ wide x 15′ long x 7′ high overall dimensions
   
• 8′ wide x 12′ long work chamber
   
• 8′ wide 3′ long ante room changing area
   
• One vent filter screen per chamber
   
• Set of two 3" dia service sleeves & one 8" dia service sleeves on opposite walls

LI-361B Dual Chamber Tent

• 6′ wide x 9′ long x 7′ high overall dimensions
   
• 6′ wide x 6′ long work chamber
   
• 6′ wide 3′ long ante room changing area
   
• One vent filter screen per chamber
   
• Set of two 3" dia service sleeves & one 8" dia service sleeve on opposite walls

LI-362 Single Chamber Tent

• 8′ wide x 8′ long x 7′ high overall dimensions
   
• One vent filter screen with velcro panel
   
• Set of two 3" dia service sleeves & one 8" dia service sleeve on adjacent walls

LI-363 Dual Chamber Tent

• 10′ wide x 9′ long x 7′ high overall dimensions
   
• 10′ wide x 5′ long work chamber
   
• 10′ wide 4′ long ante room changing area
   
• One vent filter screen per chamber
   
• Two 24" dia drum sleeves for direct attachment to waste drums
   
• Set of two 3" dia service sleeves & one 8" dia service sleeve on opposite walls